The only pneumatic gun that will
perfectly install tubing clips every time.

Utilizes both styles of clips...
...either RB Stand-Off and RB Flush Mount
Clips can be applied for radiant heating and
potable water installation.

Saves time...
...uses the power of air to get the job done
accurately and quickly.

Cannot damage tubing... chance of piercing, compressing, or
overdriving the nails of the clips.

Lightweight and easy to use...

U.S. Patent 6,481,612.
European Patent 1 350 605.

The RB-6 Pneumatic Clip Gun installs RB Clips quickly
and perfectly. For above floor or under floor applications
in radiant floor heating, or in potable water pipe
installations, the clip gun shoots safe, strong
polyethylene clips that fit perfectly without compressing
or damaging the tubing or pipe


RB-6 Video Demo

The "hammer head" of the pneumatic
tool repeatedly strikes the two nails of
the RB Clip until they are driven 5/8"
into the wood. The RB-6 Pneumatic
Clip Gun is designed to install clips
perfectly, with no chance of piercing
the tubing or overdriving the nails. The
installation will be fast, strong, and
long-lasting, providing holding power
that absolutely cannot pierce or
damage the tubing or pipe.

  The RB-6 Clip Gun is
designed to hammer in
the nails of the RB Clip
with the power of an air
compressor. The clip
fastens the tubing onto
the wood effortlessly
and perfectly.
Unlike other pneumatic tools, the RB-6 is lightweight
and easy to use. This makes it especially comfortable
to use overhead, such as in "staple up" radiant heating
installations. Also, a quick connect fitting is included
with the gun and an air plug is preattached, making
set-up easier.
After attaching the air hose, load in a strip of clips
and align the tool over the tubing so that it rests
directly onto the wooden surface. Smoothly and
completely depress the handle allowing the head
of the tool to repeatedly strike the nails until the
clip is fully seated. The RB-6 Pneumatic Clip Gun
will not permit the nails to be overdriven.

for use in:
radiant heating systems
    potable water systems

for use on:
radiant heating tubing
    PEX, CPVC water pipe

for use with:
    RB Stand-off Clips
    RB Flush Mount Clips

   Product Code
      RB-6 Pneumatic Clip Gun
      Tough, reinforced nylon gun body
      Heavy duty hammer head
      Hardened steel driver blade
      Box of 1
      Air plug installed
      3/8" quick connect fitting
      .5 oz. pneumatic tool lubricating oil
Home / Hydronics Installation Products / Home Automation Installation Products /
Identification Products
/ Quadra-Seal Security Seals / How to Order / Contact Us